| Version |
1.0.36, 8/29/2008 |
| Statistics |
Standard On Box version: 2 Meg, self extracting EXE. Unpack and run setup, no
reboot required. Off Box Version for administration control of phone
passwords: 11 Meg, self extracting EXE. Unpack and run setup. A
reboot will likely be required. |
| Compatibility |
Unity 4.0(3) through Unity 5.0(1). Versions later
than 5.0 have not been qualified with the Bellhop service. Requires compatible
version of Percipia PTCE server 4.0.4 or later.
NOTE: Bellhop with Percipia does NOT
support failover configurations. It can only be installed on one Unity
server (the primary). Installing on both primary and secondary is not
supported. It is possible to get a failover configuration working with
Bellhop for IntuiTek (see link below). If you are using IntuiTek
instead, please use this version of
Bellhop instead. |
| Support |
TAC supported |
Download Now - On Box
Unity (required)
Download Now - Off
Box for administration phone password reset only (optional)
Training video for Unity Bellhop. Self playing
EXE which will unpack a light viewer and the codec necessary to view the AVI
files directly. Should run on any Windows based machine.
Bellhop Training
Video- (7 meg, 35 minutes)
Bellhop
Administration Help
Home | General Tools
| Documents | 3.x Tools | 4.x/5.x/7.x Tools
| CUC 1.x Tools |CUC 2.x/7.x Tools |
All Downloads |
Code Samples | Links
|
 |
Questions or
problems regarding this web site should be directed to lindborg@cisco.com
Copyright © 2007 Cisco Systems, Inc. All rights reserved. |
Last
modified: 09/26/08.
| 
